ძირითად შიგთავსზე გადასვლა
EZS150PRO — HOLZMANN EZS150PRO Dual Sander and Polisher, 150 mm 1 / 4

HOLZMANN

HOLZMANN EZS150PRO Dual Sander and Polisher, 150 mm

EZS150PRO

Two orbits on one head are what separate the EZS150PRO from a single-mode sander: a switch moves the 150 mm disc between large-circle rough grinding and small-circle fine finishing and polishing. A 710 W class-II motor gives 350-700 min-1 disc speed over six steps, with a 4 mm eccentric at 3000-6600. 3 kg net.

ფასი მოთხოვნით

Price is driven by quantity, by whether abrasive discs and wool polishing bonnets (the EZS150PROPH and EZS150PROPS articles) are ordered with the tool, and by the freight and customs share of the consignment.

ფასის მოთხოვნა

What the HOLZMANN EZS150PRO does

The HOLZMANN EZS150PRO is a two-in-one machine: a rotary-eccentric sander for taking material off, and a polisher for bringing a surface up. Switching modes changes the orbit the 150 mm disc travels – large circles for rough sanding, small circles for fine finishing – so the EZS150PRO moves from levelling a filled surface to a final polish without changing machines. Disc speed runs from 350 to 700 min-1 with the eccentric rate between 3000 and 6600, and both are set across six steps on the machine. The EZS150PRO works wood, plastic, metal, stone and similar materials.

Who the EZS150PRO suits

The HOLZMANN EZS150PRO suits furniture workshops and joineries doing finishing work on assembled pieces: table tops, cabinet doors, painted or lacquered panels, and repair work where a stationary belt or disc sander cannot be used. At 3 kg net and 720 x 290 x 265 mm overall, the EZS150PRO is a one-hand-and-guide machine with a soft rubber grip and soft start, so it does not snatch when the disc first touches the workpiece.

How the EZS150PRO differs from a stationary HOLZMANN sander

The EZS150PRO is hand-held and follows the workpiece, while a stationary belt or disc sander requires the workpiece to be brought to the machine and a wide-belt calibrating sander flattens panels to a set thickness. The EZS150PRO therefore complements those machines rather than replacing them: use the stationary sander to calibrate and flatten, and the EZS150PRO for finishing, polishing and any surface already built into a product. The dual rough-and-fine capability is what separates the EZS150PRO from a plain single-mode orbital sander.

Extraction and control

The HOLZMANN EZS150PRO has a 30 mm diameter extraction connection so sanding dust can be pulled away rather than settling on the finish. The six-step speed dial matters in practice: high speed suits fast stock removal on bare timber, while low speed protects lacquer and paint from burning during polishing. Soft start keeps the EZS150PRO controllable at the moment of switch-on.

ძირითადი მახასიათებლები

  • Switchable dual action: large-circle rough grinding or small-circle fine grinding on the same 150 mm head
  • 4 mm eccentric with an eccentric rate of 3000-6600 (HOLZMANN publishes the figure without a unit)
  • Disc speed 350 to 700 min-1 across six selectable steps
  • 710 W S1 motor, 230 V / 50 Hz, appliance class II
  • Rated by HOLZMANN for wood, plastic, metal, stone and similar materials - not wood alone
  • Soft start and soft rubber grip, so the disc does not snatch at the surface on power-up
  • 30 mm extraction connection - vacuum-hose sized, not a 100 mm ducting spigot
  • 3 kg net, light enough for vertical and overhead polishing; 720 x 290 x 265 mm overall

ტექნიკური მახასიათებლები

Motor power S1
710 W
Voltage
230V / 50 Hz
Appliance class
II
Total dimensions
720 x 290 x 265 mm
Grinding disc diameter
150 mm
Grinding disc speed
350-700 min-1
Eccentricity
4
Eccentric rotation speed
3000-6600
Extraction connection diameter
30 mm
Net weight
3 kg
Gross weight
4 kg
EAN code
9120058372261

უპირატესობები

  • Sander and polisher in one 710 W machine, with switchable rough and fine orbits
  • Six-step speed control from 350 to 700 min-1 protects lacquer and paint during polishing
  • Soft start and soft rubber grip keep a 3 kg machine controllable on vertical surfaces

გასათვალისწინებელი

  • Needs a separate vacuum or extractor on the 30 mm port - no dust collection is built in
  • 150 mm disc and 710 W make it a finishing tool, not a fast stock-removal machine
  • Cannot calibrate panels to thickness; a wide-belt sander is still required for that

ხშირად დასმული კითხვები

Does the HOLZMANN EZS150PRO need 230V or 400V?
The HOLZMANN EZS150PRO runs on 230V / 50 Hz single-phase power only and there is no 400V three-phase version of the EZS150PRO. The 710 W appliance class II motor plugs into an ordinary socket, so the EZS150PRO can be used anywhere in a Georgian workshop or on site without a three-phase connection.
What does the HOLZMANN EZS150PRO not do?
The HOLZMANN EZS150PRO does not calibrate or flatten panels to a set thickness, which is the job of a wide-belt sander. The EZS150PRO also does not sharpen tools, does not come with its own dust collector, and will not remove heavy stock quickly - the 710 W motor and 150 mm disc are sized for finishing rather than aggressive levelling.
What is the difference between the two modes on the HOLZMANN EZS150PRO?
The HOLZMANN EZS150PRO has a rough grinding mode that drives the disc in larger circles for material removal, and a fine grinding mode with smaller circles for finishing and polishing. Both modes on the EZS150PRO can be combined with the six-step speed setting between 350 and 700 min-1 disc speed.
Which materials can the HOLZMANN EZS150PRO be used on?
The HOLZMANN EZS150PRO is rated for grinding and polishing wood, plastic, metal, stone and similar materials. Matching the abrasive or polishing pad to the material and dropping the speed on heat-sensitive coatings gets the best result from the EZS150PRO.
Can the HOLZMANN EZS150PRO be connected to dust extraction?
The HOLZMANN EZS150PRO has a 30 mm diameter extraction connection for a shop vacuum or extractor hose. Running the EZS150PRO on extraction is strongly recommended indoors, because airborne sanding dust settles back onto the surface being finished.
How heavy is the HOLZMANN EZS150PRO?
The HOLZMANN EZS150PRO weighs 3 kg net and 4 kg gross, and measures 720 x 290 x 265 mm overall. That weight makes the EZS150PRO manageable for extended finishing work, including vertical surfaces such as fitted cabinet doors.
What moves the price of a HOLZMANN EZS150PRO?
The EZS150PRO is quoted on enquiry rather than sold at a fixed list price. Quantity is the first driver, the second is whether abrasives and wool polishing bonnets - HOLZMANN lists these as EZS150PROPH and EZS150PROPS - are ordered with the EZS150PRO, and the third is the freight and customs share of the consignment it ships in.
How long is the lead time for an EZS150PRO?
The EZS150PRO is built to order, and the delivery date for your EZS150PRO is confirmed in writing as part of the quotation. No standing lead time is published, since it follows HOLZMANN's production and the consolidation of the shipment.
Is there anything to install or commission on an EZS150PRO?
Nothing is installed. The EZS150PRO runs from an ordinary 230 V / 50 Hz socket on a 710 W class-II motor. The only worthwhile setup step is connecting the 30 mm extraction port of the EZS150PRO to a workshop vacuum, because sanding dust otherwise settles straight back onto the surface being finished.
What consumables should be budgeted with an EZS150PRO?
Budget 150 mm abrasive discs in a range of grits, and wool bonnets if the EZS150PRO will be used for polishing rather than sanding. Budget a workshop vacuum with a 30 mm hose fitting as well, since the EZS150PRO has an extraction connection but no collector of its own.

ფასის მოთხოვნა

დანადგარი: EZS150PRO

მიუთითეთ სახელი და ერთი საკონტაქტო არხი — ტელეფონი ან ელფოსტა.

გაგზავნით ეთანხმებით კონფიდენციალურობის პოლიტიკას.

EZS150PRO ფასი მოთხოვნით ფასის მოთხოვნა