ძირითად შიგთავსზე გადასვლა
KAPI KILIT VE MENTESE — Mizrak Kapi Kilit ve Mentese Door Lock and Hinge Machine 1 / 3

MIZRAK

Mizrak Kapi Kilit ve Mentese Door Lock and Hinge Machine

KAPI KILIT VE MENTESE

The Mizrak Kapi Kilit ve Mentese is catalogued as a combined lock and hinge machine, taking both hardware cuts at one clamping, but carries no published technical table. Capacities, motor ratings and the lock-to-handle distance for the Kapi Kilit ve Mentese are confirmed by the supplier at quotation.

ფასი მოთხოვნით

Price of the Kapi Kilit ve Mentese is driven by which configuration Mizrak confirms against this undocumented record, the cutter set for lock and hinge seats, air and extraction provision, and delivery, installation and training in Georgia.

ფასის მოთხოვნა

What the Kapi Kilit ve Mentese does

The Mizrak Kapi Kilit ve Mentese combines the two hardware operations that finish a door leaf — the lock seat and the hinge seats — on a single machine, so a leaf is clamped once instead of being moved between a lock mortiser and a hinge router. In a production sequence the lock and hinge cuts come after sizing and edging, when the leaf already carries most of its added value, and a combined machine reduces the number of times a finished panel is handled. That is the practical argument for the Kapi Kilit ve Mentese over two separate stations.

Who the Kapi Kilit ve Mentese suits

The Kapi Kilit ve Mentese suits door manufacturers and joineries producing interior doors in batches who currently cut hinge seats with a hand router and template. A combined lock and hinge machine earns its place when the same hardware pattern repeats across a run of doors and the hinge positions can be set once for the batch. Shops that fit hardware on site, or that vary hinge positions door by door, will see less benefit.

Specifications are not published for this record

Mizrak’s product record for the Kapi Kilit ve Mentese contains images only, with no general information bullets and no technical table in any language, so this page states no motor power, capacity, footprint or weight. Nothing has been assumed from similar models. Before ordering the Kapi Kilit ve Mentese, obtain the electrical rating, air requirement, maximum lock seat and hinge seat lengths, the lock-to-handle centre distance and the installed dimensions in writing, and check them against your own doors and hardware.

The comparable model with published data

Buyers who need documented figures at the enquiry stage should also quote the MZK Kapi Kilit Plus, which Mizrak specifies with lock seats to 200 mm, faceplate milling to 250 mm, hinge seats to 125 mm, a 96 mm lock-to-handle axis, 5.5 kW total power and a 900 kg weight. Ask the dealer to confirm how the Kapi Kilit ve Mentese differs from that model, since the two records overlap in naming within the supplier’s own catalogue.

ძირითადი მახასიათებლები

  • Combined door lock and hinge machine, taking both hardware groups at one clamping
  • Finished leaf is clamped once instead of moving between a lock mortiser and a hinge router
  • Listed in Mizrak's door production range alongside the MZK Kapi Kilit and Kapi Kilit Plus
  • No capacity, motor or dimension figure is published for this record in any language
  • Technical schedule, electrical rating and capacities issued by the supplier per enquiry

უპირატესობები

  • Lock and hinge seats cut at one station, so a finished leaf is clamped and handled once
  • Removes hand-router and template work for hinge seats on repeat batches
  • Sits in the same range as the fully documented MZK Kapi Kilit Plus for direct comparison

გასათვალისწინებელი

  • No published specification at all: power, air, capacities and dimensions must be requested
  • Supplier catalogue naming overlaps with other lock and hinge models, so the exact machine must be confirmed
  • Dust extraction is not listed and should be assumed to be a separate purchase

ხშირად დასმული კითხვები

What are the technical specifications of the Kapi Kilit ve Mentese?
Mizrak publishes no technical specification table for the Kapi Kilit ve Mentese; the supplier record holds images only. Motor powers, capacities, footprint and weight for the Kapi Kilit ve Mentese must be requested from the dealer in writing before an order is placed.
What power supply does the Kapi Kilit ve Mentese require?
The electrical rating of the Kapi Kilit ve Mentese is not published by Mizrak. Machines of this class are normally three-phase and usually need compressed air for clamping, but both requirements for the Kapi Kilit ve Mentese must be confirmed by the supplier before the workshop connection is prepared.
What lock and hinge sizes does the Kapi Kilit ve Mentese handle?
Maximum lock seat length, hinge seat length and the lock-to-handle centre distance are not published for the Kapi Kilit ve Mentese. Send the dealer the exact lock and hinge sets you use and ask for written confirmation that the Kapi Kilit ve Mentese covers them.
How does the Kapi Kilit ve Mentese differ from the MZK Kapi Kilit Plus?
The MZK Kapi Kilit Plus carries a published specification — lock seats to 200 mm, faceplates to 250 mm, hinge seats to 125 mm, 5.5 kW total power, 900 kg — while the Kapi Kilit ve Mentese record has none. Ask Mizrak to state the difference in writing, as the supplier's own catalogue uses overlapping names for these lock and hinge machines.
Does the Kapi Kilit ve Mentese size the door leaf?
No, the Kapi Kilit ve Mentese is a lock and hinge machine and does not trim doors to length or width. Leaves must be sized beforehand on a door sizing machine such as the MZK NC Ripper series before reaching the Kapi Kilit ve Mentese.
How is the Kapi Kilit ve Mentese delivered and installed in Georgia?
Transport, positioning, commissioning and operator training for the Kapi Kilit ve Mentese are quoted per order by the Georgian dealer and are not automatically included in the machine price. Confirm the installation scope and lead time for the Kapi Kilit ve Mentese at the quotation stage.
How much does the Kapi Kilit ve Mentese cost?
The Kapi Kilit ve Mentese is quoted per enquiry rather than sold at a list price. The quoted figure for the Kapi Kilit ve Mentese depends on which configuration Mizrak confirms against an undocumented record, the cutter set for lock and hinge seats, air and extraction provision, and delivery and installation in Georgia. Ask for the MZK Kapi Kilit Plus to be quoted alongside it, since the supplier catalogue uses overlapping names for these machines.
Is the Kapi Kilit ve Mentese available, and how long does delivery take?
The Kapi Kilit ve Mentese is built to order, so lead time is confirmed at quotation. Because the supplier record for the Kapi Kilit ve Mentese carries no specification and its name overlaps with another catalogue entry, confirm at enquiry both that the machine is currently offered and which build it corresponds to.
What has to be ready before the Kapi Kilit ve Mentese is commissioned?
Before the Kapi Kilit ve Mentese is commissioned the workshop needs a level load-bearing floor with clear access either side for full-height leaves, a three-phase connection, a compressed air supply for clamping, and extraction at the cutting heads. Exact ratings for the Kapi Kilit ve Mentese are unpublished, so obtain them in writing before the services are installed, and quote delivery and commissioning as separate items.
What tooling and consumables go with the Kapi Kilit ve Mentese?
Lock seat and hinge seat cutters, their resharpening, and the extraction connection should all be budgeted separately from the Kapi Kilit ve Mentese, as nothing about the scope of supply is published. Send the lock bodies and hinge patterns actually used so the cutter package for the Kapi Kilit ve Mentese can be quoted against them.

ფასის მოთხოვნა

დანადგარი: KAPI KILIT VE MENTESE

მიუთითეთ სახელი და ერთი საკონტაქტო არხი — ტელეფონი ან ელფოსტა.

გაგზავნით ეთანხმებით კონფიდენციალურობის პოლიტიკას.

KAPI KILIT VE MENTESE ფასი მოთხოვნით ფასის მოთხოვნა