ძირითად შიგთავსზე გადასვლა
MZK RIPPER KKM — Mizrak MZK RIPPER KKM Door Panel Sizing Machine 1 / 4

MIZRAK

Mizrak MZK RIPPER KKM Door Panel Sizing Machine

MZK RIPPER KKM

MZK RIPPER KKM is the door panel sizing model in Mizrak Makine's Kapi Uretim Makineleri range, listed by the manufacturer with no technical data sheet behind it. No capacity, motor rating or blade specification is published for the MZK RIPPER KKM; figures are confirmed by the supplier at quotation.

ფასი მოთხოვნით

The price of the MZK RIPPER KKM depends on the configuration Mizrak confirms for the order, the tooling package included, and delivery into Georgia with customs clearance, positioning and commissioning.

ფასის მოთხოვნა

What the MZK RIPPER KKM does

The MZK RIPPER KKM belongs to Mizrak Makine’s door production range (Kapı Üretim Makineleri), the group of machines the Turkish manufacturer builds for bringing door leaves and door panel blanks to final width and length. Mizrak has not published a technical data sheet for the MZK RIPPER KKM in its current product record — no working width, no motor rating, no blade data — so this page carries no figures rather than borrowed ones. Anything quoted for a MZK RIPPER KKM order in Georgia should come from a written specification obtained from Mizrak at enquiry stage.

Who the MZK RIPPER KKM suits

Door manufacturers producing leaves in repeated batches are the intended buyer for the MZK RIPPER KKM, not general furniture workshops. A shop cutting a few doors a month will get more value from a sliding table panel saw, which handles door blanks alongside every other panel job. A dedicated door sizing machine such as the MZK RIPPER KKM earns its floor space only once door leaves become a daily production run and squareness across a two-metre-plus leaf has to repeat without re-setting between pieces.

Where the MZK RIPPER KKM sits in the Mizrak door range

The MZK RIPPER KKM covers the sizing stage only. Mizrak’s door programme separates the operations across different machines: the FR-532 CNC door router handles profiling and machining of the leaf face, the KAPI KILIT and MENTESE machines cut lock and hinge mortises into the leaf edge, and a thicknesser prepares stock before assembly. Buying the MZK RIPPER KKM does not replace those stations, and a complete door line normally combines several of them in sequence.

Before ordering the MZK RIPPER KKM

Mizrak currently carries the MZK RIPPER KKM as an inactive catalogue entry, which in this manufacturer’s CMS usually means built-to-order or superseded rather than withdrawn. Availability, lead time, electrical supply, dust extraction requirement and the complete specification should all be confirmed in writing before any deposit is paid. Delivery into Georgia, customs clearance, positioning and commissioning are arranged separately from the machine price.

ძირითადი მახასიათებლები

  • Listed by Mizrak Makine (Türkiye) under the Kapı Üretim Makineleri / door sizing product group
  • RIPPER designation identifies the door panel sizing stage rather than profiling or hardware routing
  • Model reference supplied exactly as printed by the manufacturer: MZK RIPPER KKM
  • No manufacturer technical data sheet published — capacities issued in writing at enquiry
  • Sits upstream of the FR-532 CNC door router and the KAPI KILIT / MENTESE mortising machines
  • Sourced through the Georgian Mizrak dealer with delivery, clearance and commissioning quoted separately

უპირატესობები

  • Purpose-built for the door sizing stage rather than a general panel saw pressed into door work
  • Part of a matched Mizrak door programme that extends to CNC routing and lock/hinge mortising
  • Supplied and supported locally in Georgia rather than bought direct from Türkiye

გასათვალისწინებელი

  • Mizrak publishes no technical data sheet, so every capacity has to be confirmed before ordering
  • Currently flagged inactive in the manufacturer's catalogue — lead time is uncertain
  • A single-purpose door machine that cannot substitute for a sliding table saw in a mixed workshop

ხშირად დასმული კითხვები

What are the technical specifications of the MZK RIPPER KKM?
Mizrak Makine publishes no technical data sheet for the MZK RIPPER KKM in its current product record. Working width, cutting length, motor power, weight and footprint for the MZK RIPPER KKM are therefore issued only as a written specification from the manufacturer at enquiry stage, and no figures are quoted on this page.
Is the MZK RIPPER KKM still available?
The MZK RIPPER KKM is marked inactive in Mizrak Makine's current catalogue, which normally indicates a built-to-order or superseded model rather than a withdrawn one. Availability and lead time for the MZK RIPPER KKM should be confirmed with the supplier before planning a purchase.
What power supply does the MZK RIPPER KKM need?
The electrical requirement of the MZK RIPPER KKM is not published by Mizrak. Industrial door sizing machines in this class normally require a 400 V three-phase supply, so the actual voltage, frequency and installed power of the MZK RIPPER KKM must be confirmed with the manufacturer before the workshop electrical connection is prepared.
Does the MZK RIPPER KKM include dust extraction?
A dust extraction unit is not part of the MZK RIPPER KKM machine price. As with all sawing and sizing machines, the MZK RIPPER KKM requires a separate extraction system sized to its hood connections, and those connection diameters must be requested from Mizrak.
Can the MZK RIPPER KKM also cut lock and hinge recesses?
No — the MZK RIPPER KKM handles the sizing stage of door production. Lock and hinge recesses are the job of Mizrak's KAPI KILIT and MENTESE machines, and face profiling is handled by the FR-532 CNC door router.
What is included in delivery of the MZK RIPPER KKM to Georgia?
Delivery of the MZK RIPPER KKM into Georgia, customs clearance, unloading, positioning and commissioning are quoted separately from the machine itself. The scope of supply for the MZK RIPPER KKM, including tooling and any optional units, should be listed in the written offer.
How much does the MZK RIPPER KKM cost?
The MZK RIPPER KKM is supplied on quotation and no list price is published. The cost of the MZK RIPPER KKM depends on the configuration Mizrak confirms for the order, the tooling package included, and delivery into Georgia with customs clearance, positioning and commissioning. Because no datasheet is published, a written specification is issued with the quotation.
Is the MZK RIPPER KKM still available and how long does it take?
The MZK RIPPER KKM is marked inactive in Mizrak's current catalogue, which usually points to a built-to-order or superseded model rather than a withdrawn one. Availability of the MZK RIPPER KKM, and the lead time if it is still built, are confirmed in writing at quotation before any deposit is discussed.
What is needed to install and commission the MZK RIPPER KKM?
Because no footprint, weight, electrical rating or extraction diameter is published for the MZK RIPPER KKM, the installation drawing and electrical schedule are requested from Mizrak before the workshop bay is prepared. Installing the MZK RIPPER KKM then involves siting and levelling on a solid floor, a three-phase connection sized to the confirmed rating, compressed air and extraction ducting, all quoted separately.
What tooling and consumables should be budgeted with the MZK RIPPER KKM?
Saw blades and cutters are the running cost on any door sizing machine, but the blade diameters, bores and cutter sizes for the MZK RIPPER KKM are not published by Mizrak. Ask for the tooling list with the quotation for the MZK RIPPER KKM and budget a spare blade set plus sharpening once those sizes are confirmed.

ფასის მოთხოვნა

დანადგარი: MZK RIPPER KKM

მიუთითეთ სახელი და ერთი საკონტაქტო არხი — ტელეფონი ან ელფოსტა.

გაგზავნით ეთანხმებით კონფიდენციალურობის პოლიტიკას.

MZK RIPPER KKM ფასი მოთხოვნით ფასის მოთხოვნა