Spindle Moulder Tooling, Cutter Heads and Knives
Tooling and set-up parts for Holzmann spindle moulders and router tables: cutter heads, profile cutters and knives, adjustable groove cutters, collet chucks, spacer ring sets and workholding accessories. 36 items are listed. Profile cutters run 160 x 20 x 30 mm at 4,800-8,000 rpm and 180 x 25 x 30 mm at 4,200-7,000 rpm with matching 1101 and 1102 profile knives; cutter heads include a 120 mm Z2 body, 125 mm and 130 mm heads and the multi-purpose UNISET 40 and UNISET 60 sets; adjustable groove cutters cover 4-15 mm and 14-28 mm; collets are stocked in 6, 8, 10, 12 mm and 1/2 inch.
- პოზიცია მარაგში
- 36
- რით განსხვავდება
- cutter or collet size (6-12 mm collets, 120-180 mm cutter bodies)
რომელ დანადგარებს უხდება
Holzmann FS-series spindle moulders, including the FS 160 L (which takes the FS160LSPZ collet chucks in 6, 8, 10, 12 mm and 1/2 in) and the FS 200, plus any moulder with a 30 mm spindle for the 160 and 180 mm profile cutters and the adjustable groove cutters. The router table and metal table insert listed here suit bench router work, and the honeycomb laser table, 500 W spindle upgrade, 4-axis set and vacuum unit belong to the CTF 45 P CNC machine.
როგორ შევარჩიოთ
| კრიტერიუმი | რეკომენდაცია |
|---|---|
| Collet 6, 8, 10, 12 mm or 1/2 in | Router-bit work on the FS 160 L spindle. Match the collet to the bit shank exactly; never grip an undersized shank. |
| 160 mm profile cutter (4,800-8,000 rpm) | Skirting, architrave and lighter profile work where the machine has a high speed step available. |
| 180 mm profile cutter (4,200-7,000 rpm) | Deeper profiles and heavier section. Only order it if the machine offers a speed step inside that band. |
| Adjustable groove cutter 4-15 mm | Panel grooves, drawer bottoms and glazing bars. One cutter covers every width in the range. |
| Adjustable groove cutter 14-28 mm | Wide grooves, housings and loose-tongue jointing without buying a dedicated cutter per width. |
| Multi-purpose head (UNISET 40 / UNISET 60) | Shops that want one body plus knife sets rather than a separate cutter for every profile. |
| Carbide inserts 14 x 14 x 2.0 / 13.6 x 13.6 x 2.0 mm | Insert heads: four edges per insert, indexed in minutes. Best value where the timber is abrasive or reclaimed. |
| Spacer ring set | Setting cutter height on the spindle. The nut must land on a full ring with the thread fully engaged. |
Match the tool to the spindle first
Spindle moulder tooling is bought against the spindle, not against the job. The bored cutters in this group are 30 mm bore tools for a standard moulder spindle, while the FS160L collet chucks in 6, 8, 10, 12 mm and 1/2 inch convert the same machine to router-bit work. A collet must match the bit shank exactly. Gripping an undersized shank in an oversized collet is how bits get thrown. The ARS12 spacer ring set positions the cutter at the right height on the spindle, and the nut has to seat on a full ring with the thread properly engaged, never on a stack of improvised washers.
Speed is a safety specification, not a preference
Every cutter body carries a stamped speed band, and it falls as diameter rises: the 160 mm profile cutter is rated 4,800 to 8,000 rpm, the 180 mm cutter 4,200 to 7,000 rpm. Before ordering, check that your machine has a speed step inside the band of the tool you want. Running a large-diameter head at a small head’s speed is the single most dangerous mistake on a spindle moulder.
Which cutter for which job
Profiling
A 160 or 180 mm body with interchangeable profile knives is the economical route: one body, a growing library of knife profiles for skirting, architrave, glazing bar and edge detail.
Grooving and rebating
The adjustable groove cutters cover 4 to 15 mm and 14 to 28 mm, so one tool handles every groove width in its range instead of buying a cutter per width. Ideal for drawer bottoms, panel grooves and loose-tongue joints.
Insert tooling
Heads taking 14 x 14 x 2.0 mm or 13.6 x 13.6 x 2.0 mm carbide inserts give four usable edges per insert. You index to a fresh edge in minutes instead of sending knives away for grinding, which suits shops running abrasive or reclaimed timber.
Knife life and replacement
HSS profile knives are reground until the knife body drops below the manufacturer’s minimum width, then replaced. Always change or sharpen knives as a matched pair of equal weight; an unbalanced head vibrates, ruins the finish and damages spindle bearings. Feed against the cutter rotation, use hold-downs and the fence guard, and never work freehand.
What moves the price
Price is driven by cutter diameter and body type (fixed-knife, adjustable or insert head), carbide against HSS knives, how many knife pairs you take with the body, whether collets and spacer rings are included, and whether the tooling package is quoted alongside a machine with commissioning.
ხშირად დასმული კითხვები
How do I find the right spindle moulder tooling for the machine I already own?
Three figures decide it: the spindle diameter (the bored tooling here is 30 mm bore), the maximum tool diameter your guard and table opening allow, and the speed steps the machine offers. Order spindle moulder tooling whose stamped speed band contains one of your machine's speeds. If you own an FS 160 L, the FS160LSPZ collets are the matched set; send us the machine model and we confirm fit on the quotation.
Can I run a 180 mm cutter head on a machine set to 8,000 rpm?
No. The 180 mm profile cutter is rated 4,200 to 7,000 rpm and 8,000 rpm is above its limit. Spindle moulder tooling is speed-rated by diameter because rim speed rises with the radius, and overspeeding a head risks throwing a knife. Drop the machine to a speed step inside the stamped band, or use the 160 mm cutter, which is rated 4,800 to 8,000 rpm.
What is the difference between a knife cutter head and an insert head?
A knife head holds ground profile knives that reproduce a specific moulding and are resharpened until they reach their minimum width. An insert head takes indexable carbide tips, typically 14 x 14 x 2.0 mm, with four usable edges that you rotate on the machine. Knife heads give you profiles; insert heads give you straight cutting with no sharpening downtime. Most joinery shops end up owning both.
How often do profile knives need sharpening or replacing?
It depends on material and metres run, but the signs are consistent: a furry surface, burning, rising feed resistance and chip-out on figured grain. Regrind profile knives while there is still body width above the minimum, then replace them. Always change spindle moulder knives as a matched, equal-weight pair, because an unbalanced head vibrates and damages the spindle bearings.
Do I need the spacer ring set?
Yes, if you intend to set cutter height accurately and safely. Spacer rings position the tool on the spindle so the profile lands where you want it on the workpiece and so the clamping nut seats on a solid, square face with the thread fully engaged. They are a standard part of any spindle moulder tooling package rather than an optional extra.
How do I order spindle moulder tooling and what is the lead time?
Tell us the machine model, the spindle diameter and speed steps, and the profiles or groove widths you need to produce. We return a written quotation covering the cutter bodies, knives or inserts, collets and spacer rings, with current stock and a confirmed lead time. Stocked spindle moulder tooling moves quickly; special profile knives are made to order and the date is stated on the quotation.