MIZRAK MZK 3200 Diamond SX Sliding Table Panel Saw

Of the two Diamond SX saws, the MZK 3200 Diamond SX is the one with a published 3200 mm sliding table and 3200 mm travel on a 430 mm aluminium carriage. A PLC unit drives motorised 45-90 degree tilt, motorised blade rise and a servo linear cast-iron rear stop; the 4 kW saw cuts 80 mm at 90 degrees.

Размер стола: 550 x 910 mm
Вес: 700 / 780 / 790 kg

Новый
Под заказ

Цена Цена по запросу

Price on the MZK 3200 Diamond SX is driven by the build variant specified (700, 780 or 790 kg with 430 or 435 mm carriage width), the PLC and servo rear stop configuration, the blade and scoring tooling package, extraction, and delivery, installation and operator training.

Запросить цену

WhatsApp +995 599 88 74 04

Ираклий Менеджер по продажам

Конфигурация под ваше напряжение и размеры
Доставка, монтаж и запуск на месте
Заводская гарантия и запчасти

The MZK 3200 Diamond SX is the programmable saw of Mizrak’s 3200 mm class

The MZK 3200 Diamond SX cuts full sheets and solid timber on a 3200 mm aluminium sliding table with 3200 mm of carriage travel, which covers a standard 2800 x 2070 mm or 3050 mm panel in a single pass. A 4 kW main motor drives blades from Ø250 x 30 mm to Ø300 x 30 mm at 4750-5250 rpm to a maximum depth of 80 mm at 90 degrees and 65 mm at 45 degrees; a Ø125 x 20 mm scorer on its own 0.75 kW motor runs at 7250 rpm ahead of the main blade to keep the underside of coated board clean.

What the PLC and servo stop change day to day

PLC control turns setting the MZK 3200 Diamond SX into entering numbers. Blade tilt from 45 to 90 degrees and blade height are motorised, and the linear cast-iron rear stop is positioned by servo drive rather than by pushing a fence against a scale. A joinery cutting five different rip widths in a shift stops losing time to fence resetting and stops accumulating the half-millimetre errors that show up when carcass parts are assembled.

Who should buy the MZK 3200 Diamond SX

The MZK 3200 Diamond SX is aimed at furniture and door workshops in the 3-15 employee range that batch-produce cabinets, wardrobes and door leaves and have outgrown hand-set adjustment. It is a production machine: the payback lives in repeatability, not in cutting anything the cheaper Diamond models cannot cut.

MZK 3200 Diamond SX compared with the neighbouring models

The MZK 3200 Diamond SX and the MZK 3200 Diamond S share the same 4 kW saw, 435 mm-class overhead-spindle carriage, machined frame and motorised tilt and rise; the SX alone adds the PLC unit and the servo linear rear stop. Step down again to the MZK 3200 Diamond and the angle and height are set by hand on a 9-spindle movement system. Step up to the MZK 3200 Concord and the motor becomes 5.5 kW with 400 mm blade compatibility, pneumatic panel hold-down and a digital cast-iron fence, at 800 kg.

What comes with the MZK 3200 Diamond SX

The published build of the MZK 3200 Diamond SX includes the 550 x 910 mm main table, 380 x 540 mm side extension, 785 x 970 mm rear extension, a 1200 mm rip fence, a 1950 mm crosscut fence with 0-3000 mm stop range, and the scoring unit. Blades, extraction and the electrical connection are supplied separately.

Основные характеристики

3200 mm sliding table with 3200 mm of carriage travel and a 430 mm wide aluminium carriage
PLC control unit with servo-driven linear cast-iron rear stop
4 kW main saw motor turning Ø250 x 30 mm to Ø300 x 30 mm blades at 4750-5250 rpm
0.75 kW scoring motor with Ø125 x 20 mm blade at 7250 rpm for chip-free coated panel
Motorised automatic 45-90 degree tilt and motorised vertical blade movement
80 mm cutting depth at 90 degrees, 65 mm at 45 degrees
1950 mm crosscut fence with ±45 degree setting and 0-3000 mm measuring stop
Machined frame, 1400 mm height and 700-790 kg net weight at 80 dB

Технические характеристики

Диаметр пильного диска (внешний x внутренний, мин.-макс.): Ø250 x 30 mm – Ø300 x 30 mm
Макс. глубина реза (90°): 80 mm
Макс. глубина реза (45°): 65 mm
Частота вращения пильного диска: 4750–5250 rpm
Мощность двигателя основной пилы: 4 kW
Диаметр подрезного диска (внешний x внутренний): Ø125 x 20 mm
Частота вращения подрезного диска: 7250 rpm
Мощность / частота вращения двигателя подрезного узла: 0.75 kW / 3000 rpm
Размер основного стола: 550 x 910 mm
Размер бокового удлинения стола: 380 x 540 mm
Размер заднего удлинения стола: 785 x 970 mm
Длина параллельного упора (на столе): 1200 mm
Длина каретки: 3200 mm
Ход каретки: 3200 mm
Угол наклона упора каретки (вправо-влево): 0–45° right and left
Ширина алюминиевой каретки: 430 mm
Длина поперечного упора (на каретке): 1950 mm
Угол наклона поперечного упора (вправо-влево): ±45°
Диапазон регулировки поперечного упора: 0 – 3000 mm
Блок управления: PLC control unit
Регулировка наклона и высоты диска: Motorised automatic 45–90° tilt and motorised vertical movement
Задний упор: Servo-driven linear cast-iron rear stop
Высота патрубка аспирации от пола: 845 mm
Высота станка: 1400 mm
Уровень шума: 80 dB
Вес нетто: 700 / 780 / 790 kg (varies by variant)

Преимущества

3200 mm sliding table and 3200 mm travel take a full sheet in one pass without an oversize footprint
PLC control and servo rear stop make rip width and blade angle repeatable settings rather than operator judgement
Scoring unit is standard, not an option, with its own 0.75 kW motor and Ø125 x 20 mm blade

Важно учесть

Extraction unit, blades and electrical installation are all separate costs, and no voltage or current rating is published
Panel handling is entirely manual - the machine has no lifting table or automatic loading
PLC and servo hardware add cost that a workshop cutting varied one-off sizes will not recover

Часто задаваемые вопросы

What electrical supply does the MZK 3200 Diamond SX need?

The MZK 3200 Diamond SX has a 4 kW main saw motor plus a 0.75 kW scoring motor, giving a combined installed motor load of 4.75 kW, alongside the PLC and servo drive. Mizrak publishes no supply voltage or current rating for the MZK 3200 Diamond SX, so the incoming supply and protection must be agreed before delivery and installation.

What size panels will the MZK 3200 Diamond SX handle?

The MZK 3200 Diamond SX has a 3200 mm sliding table with 3200 mm of travel, so a standard 2800 mm or 3050 mm sheet can be cut in one pass along its length. Crosscut width is governed by the 1950 mm crosscut fence and its 0-3000 mm measuring stop range.

What blades does the MZK 3200 Diamond SX take?

The MZK 3200 Diamond SX takes main blades from Ø250 x 30 mm to Ø300 x 30 mm and a Ø125 x 20 mm scoring blade. Blades are not part of the published specification of the MZK 3200 Diamond SX; tooth count and grind are chosen for the material, with a fine-tooth blade for melamine and a coarser grind for solid timber.

Does the MZK 3200 Diamond SX come with dust extraction?

No. The MZK 3200 Diamond SX provides a dust extraction port 845 mm above the floor but the extraction unit itself is a separate purchase, and the port diameter is not published in the supplier specification. Budget for an extractor sized to a 4.75 kW panel saw when quoting the MZK 3200 Diamond SX.

How much floor space and handling does the MZK 3200 Diamond SX need?

The MZK 3200 Diamond SX is 1400 mm tall and weighs 700-790 kg depending on variant, so it needs a level concrete floor and mechanical handling to place. Allow roughly twice the 3200 mm carriage travel in clear length so the sliding table can run fully forward and back, plus outfeed room behind the blade.

What can the MZK 3200 Diamond SX not do?

The MZK 3200 Diamond SX is a manually fed sliding table saw and not a beam saw: the MZK 3200 Diamond SX cannot cut a book of stacked panels to an optimised cutting plan, has no automatic panel loading, and does not drill, rout or edge-band. Cuts deeper than 80 mm at 90 degrees are also outside its range.

How is the MZK 3200 Diamond SX different from the MZK 3200 Diamond S?

The MZK 3200 Diamond SX differs from the MZK 3200 Diamond S by adding a PLC control unit and a servo-driven linear cast-iron rear stop. Both machines share the 4 kW main saw, the overhead-spindle aluminium carriage, motorised 45-90 degree tilt and motorised blade rise, so the choice between them is about programmed positioning rather than cutting capacity.

How much does the MZK 3200 Diamond SX cost?

The MZK 3200 Diamond SX is supplied on quotation rather than at a list price. The price of an MZK 3200 Diamond SX depends on the build variant specified, the PLC and servo rear stop configuration, the blade and scoring tooling package, whether extraction is supplied, and delivery, installation and operator training. Describe the batch sizes you cut and the MZK 3200 Diamond SX will be quoted as a working installation.

Is the MZK 3200 Diamond SX held in stock or built to order?

The MZK 3200 Diamond SX is built to order with its PLC and servo configuration set for the order, so availability of an MZK 3200 Diamond SX is confirmed at quotation against the current schedule. Mention any fixed production start date when you enquire.

What does commissioning an MZK 3200 Diamond SX involve?

Commissioning an MZK 3200 Diamond SX involves levelling the machine, squaring the 3200 mm carriage and 1950 mm crosscut fence, connecting a three-phase supply for the 4 kW saw, 0.75 kW scorer, PLC and servo drive, calibrating the servo rear stop against measured test cuts, and connecting extraction at the 845 mm port. Commissioning and operator training on the MZK 3200 Diamond SX are quoted with the machine.

What consumables should be budgeted with the MZK 3200 Diamond SX?

Budget main blades from Ø250 x 30 mm to Ø300 x 30 mm, Ø125 x 20 mm scoring blades and a dust extraction unit separately from the MZK 3200 Diamond SX, as none are listed in the supplier specification. On an MZK 3200 Diamond SX running programmed batches, keeping a spare sharpened blade set avoids stopping a run.

MZK 3200 DIAMOND SX Цена по запросу Запросить цену