Skip to main content
+995 599 88 74 04

Door Production Machinery

Door production machinery covers the machines that size a door leaf, cut its lock, handle and hinge seats, profile the frame stock and assemble the finished frame. This category holds 13 machines from MIZRAK and NETMAK (Turkey): door leaf sizing and ripping machines (8), lock and hinge mortising machines (3), a CNC door frame moulder (1) and a CNC door frame assembly machine (1). The range covers manual leaf sizing through to servo CNC lines. Every machine on this page is supplied by quotation, specified against your door sizes and hardware before pricing.

CNC Door Frame and Architrave MouldersCNC Door Frame Assembly MachinesDoor Lock and Hinge Mortising MachinesDoor Panel Sizing Machines

13 Machine

Machines found

  • Mizrak FR-532 Door Component Moulder
    CNC Door Frame and Architrave Moulders

    Mizrak FR-532 Door Component Moulder

    Air pressure
    6–8 BAR
    Spindle
    7.5 kW
    Price on request
  • Mizrak Kapi Kilit ve Mentese Door Lock and Hinge Machine
    Door Lock and Hinge Mortising Machines

    Mizrak Kapi Kilit ve Mentese Door Lock and Hinge Machine

    The Mizrak Kapi Kilit ve Mentese is catalogued as a combined lock and hinge machine, taking both hardware cuts at one clamping, but carries no published technical table. Capacities, motor ratings and the lock-to-handle distance for the Kapi Kilit ve Mentese are confirmed by the supplier at quotation.

    Price on request
  • Mizrak MZK NC RIPPER Door Sizing Machine
    Door Panel Sizing Machines

    Mizrak MZK NC RIPPER Door Sizing Machine

    Air pressure
    6 - 8 Bar
    Weight
    1580 kg
    Price on request
  • Mizrak MZK NC RIPPER KK Door Sizing and Lock Slotting Machine
    Door Panel Sizing Machines

    Mizrak MZK NC RIPPER KK Door Sizing and Lock Slotting Machine

    Air pressure
    6 - 8 Bar
    Weight
    2050 kg
    Price on request
  • Mizrak MZK RIPPER KKM Door Panel Sizing Machine
    Door Panel Sizing Machines

    Mizrak MZK RIPPER KKM Door Panel Sizing Machine

    MZK RIPPER KKM is the door panel sizing model in Mizrak Makine's Kapi Uretim Makineleri range, listed by the manufacturer with no technical data sheet behind it. No capacity, motor rating or blade specification is published for the MZK RIPPER KKM; figures are confirmed by the supplier at quotation.

    Price on request
  • MZK CNC Ripper Double Door Sizing and CNC Machining Line
    Door Panel Sizing Machines

    MZK CNC Ripper Double Door Sizing and CNC Machining Line

    Cutting Width
    1000 mm
    Cutting Height
    60 mm
    Spindle
    5.5 kW
    Price on request
  • MZK Kapi Kilit Door Lock Machine
    Door Lock and Hinge Mortising Machines

    MZK Kapi Kilit Door Lock Machine

    Lock seats only: the MZK Kapi Kilit is the base door lock machine in Mizrak's door range, clamping a finished leaf and guiding the cutter mechanically instead of by hand. Mizrak publishes no technical table for the MZK Kapi Kilit, so capacities, motor rating and dimensions are confirmed by the supplier at quotation.

    Price on request
  • MZK Kapi Kilit Plus Door Lock and Hinge Machine
    Door Lock and Hinge Mortising Machines

    MZK Kapi Kilit Plus Door Lock and Hinge Machine

    Air pressure
    6–8 atm
    Weight
    900 kg
    Price on request
  • MZK Manuel Kapi Ebatlama Manual Door Sizing Machine
    Door Panel Sizing Machines

    MZK Manuel Kapi Ebatlama Manual Door Sizing Machine

    Cutting Width
    265 mm
    Cutting length
    250 mm
    Price on request
  • MZK NC Ripper Double PLC Control Door Sizing Machine
    Door Panel Sizing Machines

    MZK NC Ripper Double PLC Control Door Sizing Machine

    Air pressure
    6 - 8 Bar
    Cutting length
    Ø25 x 150 Teeth
    Weight
    2450 kg
    Price on request
  • MZK NC Ripper KS Door Sizing Machine
    Door Panel Sizing Machines

    MZK NC Ripper KS Door Sizing Machine

    Air pressure
    6 – 8 Bar
    Weight
    1450 kg
    Price on request
  • NETMAK NKM 240 CNC Door Frame Assembly Machine
    CNC Door Frame Assembly Machines

    NETMAK NKM 240 CNC Door Frame Assembly Machine

    Weight
    420 kg

    A single door frame leaves the NETMAK NKM 240 CNC every 20 seconds and a double frame every 28, for a rated 150 frames per 8-hour shift. The NKM 240 CNC saws and mills frame stock 100 to 320 mm wide and up to 50 mm thick with a 3 kW milling spindle at 6000 rpm and a 2.2 kW saw at 4000 rpm.

    Price on request
  • Ripper CNC KKM Door Machining Centre
    Door Panel Sizing Machines

    Ripper CNC KKM Door Machining Centre

    Spindle
    1.5 kW and 2.2 kW

    The Ripper CNC KKM is the PC-controlled member of the RIPPER range: machining positions run from a program instead of mechanical stops, on 750 W X, Y and Z servo motors, 1.5 kW and 2.2 kW spindle motors and a 2000 mm blade machining capacity. A remote connection for diagnostics is included.

    Price on request

How to choose door production machinery

Choose door production machinery by deciding which of the three jobs in a door plant you are mechanising first: the leaf, the hardware seats, or the frame. Most door workshops in Georgia start with the leaf, because leaf sizing is the operation that consumes the most operator time and where a wrong cut scraps the most expensive component.

Sizing the leaf

Leaf sizing machines are the largest group in this category, with 8 machines listed. The dividing line inside that group is whether the machine only sizes the leaf or also machines the hardware. A manual sizing machine trims the leaf to width and length and cuts nothing else. The NC-controlled RIPPER family sizes and edge-mills, and the KK versions add lock, handle and recess machining on the same pass. The twin-bridge and servo CNC versions exist for plants where cycle time per door, rather than accuracy, is the constraint. Frame, jamb and architrave components are narrow parts and are handled by the KS model rather than by the leaf machines.

Lock, handle and hinge seats

Lock and hinge mortising machines are the answer when leaves arrive already sized – from a supplier or from a machine that does not pocket hardware. The 3 mortising machines here cut lock seats, faceplate recesses and hinge seats, and the specification that separates them is whether the machine cuts locks only or locks, faceplates and hinges together at one clamping. A workshop that already runs a RIPPER KK or a CNC RIPPER usually does not need a separate mortising machine.

Making the frame

Frame production is a separate machine group from the leaf. Frame stock is profiled by through-feed moulding, and the FR-532 covers that operation. Assembling the four profiled pieces into a finished frame is what the NETMAK NKM 240 CNC frame assembly machine does. A door plant that buys leaf machines but subcontracts frames postpones both of these; a plant that wants to control the whole door buys the profiling and the assembly machine together.

Power supply, space and extraction

Door production machinery is three-phase 400 V equipment, and the installed power on this class of machine is substantial – the CNC leaf machines and the frame moulder carry multiple spindle motors plus servo drives. Confirm the incoming supply and breaker rating with an electrician before ordering, and plan compressed air as well, because clamping on these machines is pneumatic. Space is dictated by door length: allow the full leaf length clear at infeed and outfeed plus room for a stack of leaves on each side. All of this machinery produces chip and dust at every cutting head, so extraction ducting must reach each head, not only the main cabinet.

What the quoted price depends on

The price of door production machinery is driven by the control system and the number of working units. PLC-controlled machines sit below servo CNC machines; a single bridge sits below a twin bridge; a machine that only sizes sits below one that also pockets locks, handles and hinges. Add to that the tooling package – cutters, saw blades, lock and hinge templates – which is quoted separately, plus delivery to site, installation and operator training. Send your leaf sizes, frame profiles and the lock and hinge hardware you fit, and we will quote a machine specified against them.

How to choose

  1. You buy leaves in and only trim them

    A manual leaf sizing machine with a tilting cutting head is enough; hardware seats stay a separate operation

  2. You want sizing and hardware in one pass

    Choose a RIPPER KK or CNC RIPPER version, which adds lock, handle and recess machining to the sizing operation

  3. Cycle time per door is the constraint

    Twin-bridge and servo CNC leaf machines cut a full door plus lock pocket in a published cycle time; single-bridge machines cost less but process one operation at a time

  4. Leaves arrive already sized

    Skip the leaf machines and take a lock and hinge mortising machine (3 listed), which cuts lock seat, faceplate and hinge seat

  5. Narrow frame, jamb and architrave stock

    The KS sizing model handles narrow component widths, where the other RIPPER models are built around door-leaf widths

  6. You want to make frames as well as leaves

    Profile the frame stock on the FR-532 through-feed moulder and join the profiled pieces on the NKM 240 CNC assembly machine

  7. Shop supply and services

    Plan three-phase 400 V with the breaker sized to installed power, plus compressed air for pneumatic clamping on every machine in this category

  8. Solid timber preparation before the door

    Planing, thicknessing and moulding of the raw timber belongs in woodworking machinery; this category starts once the blank or leaf exists

Frequently asked questions

Which door production machine should a door workshop buy first?
A door workshop should normally buy the leaf sizing machine first, because leaf sizing takes the most operator time and a mis-cut leaf is the most expensive scrap in door production. A separate lock and hinge mortising machine is the right first purchase only if leaves already arrive sized. Frame machines - the FR-532 moulder and the NKM 240 CNC assembly machine - are usually added once leaf production is under control.
What is the difference between the NC RIPPER models and the CNC versions?
The NC RIPPER models use PLC touchscreen entry, while the CNC versions use programmed servo positioning on the X, Y and Z axes. The practical difference is repeatability and cycle time rather than the cuts themselves: PLC machines are set by the operator per batch, servo CNC machines run a stored program. Twin-bridge models process a door faster than single-bridge models. All of these are listed under door leaf sizing machines.
Do I need a separate lock and hinge machine if I buy a RIPPER KK?
A separate lock and hinge machine is usually not needed alongside a RIPPER KK or a CNC RIPPER, because those models already machine lock, handle and hinge seats during the sizing pass. A dedicated lock and hinge mortising machine is the right choice for a workshop that buys leaves already sized, or that wants hardware machining to continue while the sizing machine is busy on another batch.
What power supply does door production machinery need?
Door production machinery in this category runs on three-phase 400 V, and installed power is high because the CNC leaf machines and the frame moulder carry several spindle motors plus servo drives. Have an electrician confirm the incoming supply, breaker rating and cable size before ordering, and plan a compressed air supply as well, since clamping on these machines is pneumatic. Tell us your available supply when requesting a quotation.
How much space and extraction does a door line need?
A door line needs clear length equal to the full leaf plus stacking room at infeed and outfeed, not just the machine footprint, and a frame moulder needs through-feed length in front and behind the machine. Extraction ducting must reach every cutting head on each machine rather than a single cabinet port, because door production machinery cuts at several points along the pass.
What determines the price of a door production machine?
The price of a door production machine is determined by the control system and the number of working units: PLC control sits below servo CNC, a single bridge below a twin bridge, and a sizing-only machine below one that also pockets locks, handles and hinges. Tooling, lock and hinge templates, delivery to site, installation and operator training are quoted as separate lines. Send your leaf sizes and hardware and we will quote against them.