MIZRAK OF TUANA 56 Edge Banding Machine

The OF TUANA 56 is the lightest electrical installation in the TUANA 56 family at 10.08 kW, against 12.68 kW for the OF-KA TUANA 56, because no grooving unit is fitted. PLC screen control, pre-milling, a 54 mm trim unit, scraping and polishing take 8 to 54 mm panels through the OF TUANA 56 at 14 m/min.

Толщина заготовки: 8 – 54 mm
Рабочая скорость: 14 m/min
Давление воздуха: 6 – 8 atm
Вес: 2180 kg

Новый
Под заказ

Цена Цена по запросу

The OF TUANA 56 price is driven by the PLC control and finishing unit specification, the blade and spare tooling package, the chip extraction system and compressor needed to run it, and delivery, rigging a 2180 kg machine into a 5900 mm bay and the 10.08 kW electrical connection.

Запросить цену

WhatsApp +995 599 88 74 04

Ираклий Менеджер по продажам

Конфигурация под ваше напряжение и размеры
Доставка, монтаж и запуск на месте
Заводская гарантия и запчасти

What the OF TUANA 56 does

The OF TUANA 56 is an automatic edge banding machine for panels 8 to 54 mm thick, applying 0.40-3 mm edge tape at 14 m/min under PLC screen control. The OF TUANA 56 covers the core edging sequence in a single pass: double-jumping pre-milling, gluing with shear and pressing units, pre-heating, front and end cutting, automatic milling, a new 54 mm trim unit, automatic scraping, glue cleaning fluid and polishing. Minimum workpiece width is 100 mm.

Control and operation

Operation of the OF TUANA 56 is built around a PLC screen control unit and a preview unit with counter, so the operator sets the job on a panel and the machine reports piece counts back. That combination is aimed at a workshop with one or two edge banding operators rather than a shift-based production line, and it keeps the OF TUANA 56 straightforward to teach to a new employee.

How the OF TUANA 56 compares

The OF TUANA 56 is the entry point to the TUANA 56 family and the honest choice for square-edge carcase work. Panel capacity, 8-54 mm, and speed, 14 m/min, match the OF-KA TUANA 56, but the OF TUANA 56 has no grooving unit and no hot air blowing system, which is why its connected load is 10.08 kW against 12.68 kW and its line is 5900 mm long instead of 6200 mm. A workshop that needs back-panel grooves cut inline, or that bands rounded corners, should step up to the OF-KA TUANA 56 or the OF-KA TUANA 56 PREMIUM instead of adding units later.

Installation requirements

The OF TUANA 56 measures 5900 x 800 x 1650 mm and weighs 2180 kg, with a working height of 875 mm and a 3.5 kg glue pot. The machine needs a 380-430 V AC 50-60 Hz three-phase supply, 10.08 kW of connected electrical power and compressed air at 6-8 atm. Sound level is rated at Lwa 82.9 dB, and trimming uses Ø49 x R3 mm top and bottom blades with a Ø69 x R3 mm trim blade.

Основные характеристики

Workpiece thickness 8-54 mm at 14 m/min with a 100 mm minimum workpiece width
PLC screen control unit with a preview unit and piece counter
1.5 kW double-jumping pre-milling unit at 12,000 rpm with a Ø70 mm blade
3.5 kg glue pot with pre-heater, shear and pressing units and glue cleaning liquid
New 54 mm trim unit with Ø49 x R3 mm top-bottom blades and a Ø69 x R3 mm trim blade
0.25 kW polishing unit at 2840 rpm and an automatic scraping unit
2.2 kW chain conveyor motor and 10.08 kW total electric power, the lowest in the TUANA 56 family
5900 x 800 x 1650 mm machine size, 875 mm working height, 2180 kg weight

Технические характеристики

Номинальный ток: 380–430 V AC, 50–60 Hz
Уровень шума: Lwa 82.9 dB
Толщина кромки: 0.40 mm – 3 mm
Толщина заготовки: 8 – 54 mm
Минимальная ширина заготовки: 100 mm
Рабочая скорость: 14 m/min
Рабочая высота: 875 mm
Емкость бачка для клея (макс.): 3.5 kg
Давление воздуха: 6 – 8 atm
Диаметр пильного диска узла прифуговки: Ø70 mm
Фреза черновой торцовки: Ø49 x 20 Z4
Диаметр пильного диска торцовочного узла: Ø100 x 3.2 mm
Диаметр фрезы узла снятия свесов: Ø49 x R3 mm
Диаметр фрезы узла торцовки: Ø69 x R3 mm
Макс. длина профилирования углов: 42 mm
Мощность / частота вращения двигателя прифуговки: 1.5 kW / 12,000 rpm
Мощность / частота вращения двигателя торцовочного узла: 0.37 kW / 12,000 rpm
Мощность / частота вращения двигателя узла снятия свесов: 0.75 kW / 12,000 rpm
Мощность / частота вращения двигателя торцовочного узла: 0.55 kW / 12,000 rpm
Мощность / частота вращения двигателя полировального узла: 0.25 kW / 2840 rpm
Мощность / частота вращения двигателя цепного конвейера: 2.2 kW / 15 rpm
Общая электрическая мощность: 10.08 kW
Длина станка: 5900 mm
Ширина станка: 800 mm
Высота станка: 1650 mm
Вес станка: 2180 kg

Преимущества

Lowest connected load in the TUANA 56 family at 10.08 kW, easiest of the three to install electrically
Shortest line at 5900 mm while keeping full 8-54 mm panel capacity
PLC screen control with a preview unit and piece counter for job tracking

Важно учесть

No grooving unit and no hot air blowing system, so back-panel grooves need a second machine
Fixed 14 m/min conveyor speed with no variable feed option
Heavier than the OF-KA TUANA 56 at 2180 kg despite being 300 mm shorter, and still needs three-phase power, a compressor and separate extraction

Часто задаваемые вопросы

What panels can the OF TUANA 56 band?

The OF TUANA 56 bands workpieces from 8 to 54 mm thick with a minimum workpiece width of 100 mm, using edge tape from 0.40 to 3 mm. For panels over 54 mm the OF-KA TUANA 56 PREMIUM is the model to specify, as it goes to 60 mm.

What power supply does the OF TUANA 56 need?

The OF TUANA 56 runs on a 380-430 V AC 50-60 Hz three-phase supply with a total electric power of 10.08 kW, the lowest connected load in the TUANA 56 family, plus compressed air at 6-8 atm. Single-phase operation is not offered for the OF TUANA 56.

Does the OF TUANA 56 have a grooving unit?

No. The OF TUANA 56 has no grooving unit and no hot air blowing system, which is the main difference from the OF-KA TUANA 56. Workshops that need the back-panel groove cut inline should specify the OF-KA TUANA 56, which has a 2.6 kW grooving motor.

How much space does the OF TUANA 56 need?

The OF TUANA 56 is 5900 mm long, 800 mm wide and 1650 mm high, weighs 2180 kg and works at an 875 mm height. Add infeed and outfeed clearance for the longest panel, so plan a clear run of roughly 10 metres for the OF TUANA 56.

What tooling and consumables does the OF TUANA 56 need?

The OF TUANA 56 uses a Ø70 mm pre-milling blade, a Ø49 x 20 Z4 rough trimming cutter, a Ø100 x 3.2 mm end trimming blade, Ø49 x R3 mm top-bottom trimming cutters and a Ø69 x R3 mm trim cutter, plus EVA or PUR granule glue for the 3.5 kg pot and edge tape from 0.40 to 3 mm. Glue type for the OF TUANA 56 should be confirmed with the supplier.

What is not included with the OF TUANA 56?

The OF TUANA 56 specification does not list a dust extraction unit, a compressor, glue or edge tape. The workshop must connect the OF TUANA 56 to its own chip extraction and supply compressed air at 6-8 atm.

How much does the OF TUANA 56 cost?

The OF TUANA 56 edge banding machine is supplied on quotation rather than at a published list price. The quoted figure for an OF TUANA 56 depends on the PLC control and finishing unit specification, the blade and spare tooling package, the chip extraction system and compressor required, and delivery, rigging and the 10.08 kW three-phase connection. Because the OF TUANA 56 has the lowest connected load in the TUANA 56 family, the electrical installation cost is typically lower than for the OF-KA TUANA 56 or the PREMIUM.

What is the lead time for an OF TUANA 56?

The OF TUANA 56 is built to order by Mizrak, so the current lead time is confirmed at quotation rather than published. Delivery timing for an OF TUANA 56 follows the factory schedule and the units specified at the time of order, and is confirmed in writing on the offer.

What is needed to install and commission an OF TUANA 56?

An OF TUANA 56 needs a bay taking the 5900 mm machine plus panel infeed and outfeed, a level floor rated for 2180 kg, a 380-430 V three-phase supply for 10.08 kW, a 6-8 atm compressed air line and a connected chip extraction system, which is not supplied with the machine. Commissioning of the OF TUANA 56 covers levelling, PLC and unit setting, glue pot and trim adjustment, sample panels and operator handover, and is arranged through the dealer.

What tooling and consumables should be budgeted alongside the OF TUANA 56?

Alongside the OF TUANA 56 machine price, budget for hot-melt glue for the 3.5 kg pot, edge tape from 0.40 mm to 3 mm, glue cleaning liquid and replacement tooling in the OF TUANA 56 sizes - Ø70 mm pre-milling, Ø49 x 20 Z4 rough trimming, Ø100 x 3.2 mm end trimming, Ø49 x R3 and Ø69 x R3 trimming blades - plus scraper knives. A chip extraction system and a compressor delivering 6-8 atm are separate purchases, and a second machine or router is needed for back-panel grooving, which the OF TUANA 56 does not do.

OF TUANA 56 Цена по запросу Запросить цену