MZK Kapi Kilit კარის საკეტის ბუდის ამოსაჭრელი დანადგარი

Lock seats only: the MZK Kapi Kilit is the base door lock machine in Mizrak's door range, clamping a finished leaf and guiding the cutter mechanically instead of by hand. Mizrak publishes no technical table for the MZK Kapi Kilit, so capacities, motor rating and dimensions are confirmed by the supplier at quotation.

Lock seats only: the MZK Kapi Kilit is the base door lock machine in Mizrak's door range, clamping a finished leaf and guiding the cutter mechanically instead of by hand. Mizrak publishes no technical table for the MZK Kapi Kilit, so capacities, motor rating and dimensions are confirmed by the supplier at quotation.

The Mizrak Kapi Kilit ve Mentese is catalogued as a combined lock and hinge machine, taking both hardware cuts at one clamping, but carries no published technical table. Capacities, motor ratings and the lock-to-handle distance for the Kapi Kilit ve Mentese are confirmed by the supplier at quotation.

Air pressure

6–8 atm

Weight

900 kg

Table Size

550 x 910 mm

Weight

808 kg

Weight

760 kg

Where floor length is tight, the MZK 3200 SPECIAL puts the full SPECIAL specification on a 3200 mm sliding table rather than the 3800 mm stroke of the MZK 3800 SPECIAL: 420 mm aluminium carriage on linear guides, 4 kW saw motor, 0.75 kW scoring unit, actuator-driven 45-90 degree tilt, 760 kg net.

Weight

646 kg

Sitting between the 3200 mm and 2200 mm models, the MZK 2800 PRESTIJ offers 2800 mm of sliding table travel on the lightest mid-size frame in the line at 646 kg. The cutting head is unchanged from the longer PRESTIJ saws: 4 kW saw motor, 0.75 kW scorer, 80 mm depth at 90 degrees.

Weight

625 kg

625 kg წონით MZK 2200 PRESTIJ არის ყველაზე მსუბუქი დანადგარი PRESTIJ-ის ხაზში, დამზადებული 2200 mm ჩამოსაშვებ მაგიდაზე იმ საამქროებისთვის, რომლებიც ძირითადად ამუშავებენ ნახევარ ფილებსა და წინასწარ დაჭრილ მზა დეტალებს. ჭრის სიმძლავრე შემცირებული არ არის: 4 kW ძირითადი ძრავი, 0.75 kW ჩამჭრელი ძრავი, 80 mm ჭრის სიღრმე 90 გრადუსზე და 65 mm 45 გრადუსზე.

Weight

625 kg

At 625 kg the MZK 2200 PRESTIJ is the lightest saw in the PRESTIJ line, built on a 2200 mm sliding table for shops working mainly from half sheets and pre-cut board. Cutting capacity is not reduced: 4 kW saw motor, 0.75 kW scoring motor, 80 mm depth at 90 degrees and 65 mm at 45 degrees.

Weight

700 - 780 - 790 kg

A 3200 mm stroke takes a standard sheet lengthwise in one pass, and that is what separates the MZK 3200 PRESTIJ from the 2800 mm MZK 2800 PRESTIJ below it and the 3800 mm model above. Manual tilt and height, 380 mm aluminium carriage, 4 kW saw motor, 0.75 kW scorer, 700-780-790 kg by build.

Table Size

550 x 910 mm

Weight

740 kg

Air pressure

6 - 8 Bar

Weight

1580 kg