Skip to main content
+995 599 88 74 04

HOLZMANN PJ100PRO Biscuit Jointer (900 W, 100 mm Carbide Cutter)

HOLZMANN PJ100PRO Biscuit Jointer (900 W, 100 mm Carbide Cutter)

Slot depth is the dividing line in HOLZMANN's biscuit-jointer pair: the PJ100PRO publishes 19 mm, plus a 10800 min-1 cutter speed and a -45 to +90 degree swivel fence that the entry PJ100A does not list. A 900 W class-II motor turns a 100 x 22 x 3.8 mm six-tooth carbide cutter. 4.5 kg net, case and dust bag.

Weight
4.50 kg
  • New
  • To order
Price Price on request

Price on this article moves with quantity, whether spare carbide cutters and a stock of flat dowels are added to the order, and the freight and customs line for the consignment it travels in.

Request price
+995 599 88 74 04
Irakli Sales manager
  • Configured to your voltage and dimensions
  • Delivery, installation and on-site commissioning
  • Factory warranty and spare parts

What the HOLZMANN PJ100PRO does

The HOLZMANN PJ100PRO cuts crescent-shaped slots for flat dowels so two pieces of timber can be aligned and glued without visible fasteners. A 900 W motor spins a tungsten-carbide 6-tooth cutter of 100 x 22 x 3.8 mm at 10800 min-1, and the plunge mechanism reaches a maximum milling depth of 19 mm. That combination covers the joints a furniture workshop makes every day: edge-to-edge panel glue-ups, carcase corners, face frames, mitred plinths and worktop joints.

Who the PJ100PRO suits

The PJ100PRO belongs in a joinery or furniture shop that assembles solid wood and board material by hand rather than on a line. At 4.5 kg net the PJ100PRO is carried to the bench or to site, plugs into an ordinary 230 V / 50 Hz socket, and is built to protection class II with an IP 20 rating, so the machine is a dry indoor tool. The fence swivels through -45° to +90°, which lets the PJ100PRO register on a face or an edge and cut mitre joints without a jig, and the M10 milling adapter takes the standard cutter mount.

PJ100PRO compared with the HOLZMANN PJ100A

The PJ100PRO is the heavier and better-equipped of the two HOLZMANN biscuit jointers. The PJ100A is the entry model at 3.30 kg net with a 100 x 22 x 4 mm carbide cutter and a plain synthetic box. The PJ100PRO adds the -45° to +90° swivel range, the published 19 mm milling depth and 10800 min-1 cutter speed, the M10 adapter and a dust bag. A workshop buying one jointer for daily production should take the PJ100PRO; the PJ100A suits occasional use.

Delivery contents

The PJ100PRO is delivered in a synthetic carrying box with the tungsten-carbide cutter and a dust bag, so the machine is ready to cut on arrival. Gross shipping weight is 6 kg.

Key specifications

  • Published maximum milling depth 19 mm - a figure HOLZMANN states for the PRO and not for the entry-level PJ100A
  • Cutter speed 10800 min-1 at the 100 mm maximum milling diameter
  • Swivel range -45 to +90 degrees, so face, edge and mitred slots are cut off the same fence
  • M10 milling adapter thread on the cutter mount
  • Six-tooth tungsten-carbide cutter 100 x 22 x 3.8 mm (the PJ100A cutter is 4 mm thick)
  • 900 W S1 motor, 230 V / 50 Hz, appliance class II, IP 20 - dry indoor use
  • 4.5 kg net against 3.30 kg for the PJ100A; 6 kg gross for shipping
  • Synthetic carry case plus dust bag; the PJ100A is delivered in the box alone
  • Declared 89 dB(A) sound pressure and 5.1 m/s2 hand-arm vibration

Technical specifications

Motor power (S1)
900 W
Voltage
230 V / 50 Hz
Speed
10800 min-1
Appliance class
II
Protection rating
IP 20
Swivel range
-45° to +90°
Max. milling depth
19 mm
Max. milling diameter
100 mm
Milling adapter
M10
Cutter
Tungsten carbide, ø100 x ø22 x 3.8 mm, 6T
Sound power level
100 dB(A)
Sound pressure level
89 dB(A)
Hand-arm vibration
5.1 m/s²
Net weight
4.50 kg
Gross weight
6 kg
EAN code
9120058376634

Benefits

  • 19 mm milling depth and 10800 min-1 carbide cutter handle hardwood and board equally
  • -45° to +90° swivel fence covers face, edge and mitre joints without extra jigs
  • 4.5 kg with a case and dust bag, so the PJ100PRO travels to site

Worth noting

  • Single-phase 230 V only, with no three-phase variant for shops wired at 400 V
  • The supplied dust bag is small; continuous chipboard work needs a workshop extractor
  • IP 20 and class II construction restrict the PJ100PRO to dry indoor use

Frequently asked questions

What power supply does the HOLZMANN PJ100PRO need?
The HOLZMANN PJ100PRO runs on single-phase 230 V / 50 Hz and draws 900 W, so the PJ100PRO plugs into an ordinary workshop or site socket. There is no 400 V three-phase version of the PJ100PRO; a three-phase connection is not required and cannot be used.
How deep does the PJ100PRO cut?
The PJ100PRO reaches a maximum milling depth of 19 mm using a 100 mm diameter tungsten-carbide cutter, which covers the standard flat-dowel sizes used in carcase, frame and panel work.
Can the PJ100PRO cut mitre joints?
Yes. The PJ100PRO fence swivels through -45° to +90°, so the PJ100PRO can be set on a mitred edge and cut the slot without a separate jig.
What does the PJ100PRO not do?
The PJ100PRO is a biscuit jointer only. The PJ100PRO does not cut mortises or through-tenons, does not drill dowel holes, does not rout profiles or grooves along a board, and is not a substitute for a spindle moulder or a mortising machine. Slot depth is limited to 19 mm.
Does the PJ100PRO need dust extraction?
The PJ100PRO is delivered with a dust bag and an extraction port, which is enough for intermittent bench work. For continuous production the PJ100PRO is better connected to a workshop extractor, since a small bag fills quickly in chipboard and MDF.
What is included with the PJ100PRO?
The PJ100PRO is supplied in a synthetic carrying case with the tungsten-carbide 6-tooth cutter (ø100 x ø22 x 3.8 mm) fitted and a dust bag. Net weight is 4.5 kg, gross shipping weight 6 kg.
What actually drives the price of a HOLZMANN PJ100PRO?
The PJ100PRO is quoted on enquiry rather than sold at a fixed list price, and the figure moves on three things: how many units you take, whether spare 100 x 22 x 3.8 mm carbide cutters and a supply of flat dowels go on the same order, and the freight and customs share of the consignment the PJ100PRO arrives in. Ordering the PJ100PRO alongside other HOLZMANN tools spreads that freight line.
How long does delivery of a PJ100PRO take?
The PJ100PRO is built to order and the current lead time is confirmed with the quotation - we do not publish a standing figure, because it depends on HOLZMANN's production slot and the consolidation of the shipment your PJ100PRO travels in. Ask for the date in writing and it forms part of the offer.
Does the PJ100PRO need commissioning or installation?
No. The PJ100PRO is a hand-held 4.5 kg tool on a 230 V / 50 Hz class-II supply, so there is nothing to level, wire or duct. Handover covers squaring the swivel fence, setting the 19 mm depth stop and connecting the dust bag; after that the PJ100PRO is ready to cut.
What should be budgeted separately when buying a PJ100PRO?
Budget flat dowels as an ongoing consumable and at least one spare carbide cutter for the PJ100PRO, since a blunt cutter stops production. If the PJ100PRO will run all day in chipboard or MDF, budget a workshop extractor too - the supplied dust bag fills quickly and the PJ100PRO works far cleaner on a hose.
PJ100PRO Price on request Request price