1 / 2
HOLZMANN
HOLZMANN ES30110 Eccentric Clamping System (ML 110 mm, Ø 30 mm)
ES30110
Where the ES25070 runs out, the HOLZMANN ES30110 carries on: ML 110 mm at Ø 30 mm, 1.5 kg net against 1 kg, in a 100 x 100 x 120 mm carton. HOLZMANN gives both units the same job - fixing heavy and unbalanced turning pieces - but 40 mm more length and 5 mm more section deflect less.
Price on the ES30110 is driven by the larger ML 110 mm / Ø 30 mm size class against the ES25070, by the quantity ordered, by HOLZMANN's current list price and the exchange rate, by whether the 1.60 kg gross item ships with a machine consignment or as a standalone parcel, and by the customs and tax treatment at landing.
ფასის მოთხოვნაWhat the HOLZMANN ES30110 eccentric clamping system is
The HOLZMANN ES30110 is an eccentric clamping system for wood lathes, used to fix heavy and unbalanced turning pieces. HOLZMANN specifies the ES30110 as ML = 110 mm with a diameter of 30 mm, and the unit weighs 1.5 kg net. The ES30110 is the larger of the two eccentric clamping systems in the HOLZMANN turning accessory range and is a workholding device rather than a cutting tool.
Why the larger size is chosen
Mass and length are the point of the ES30110. Big, wet or irregular blanks – natural-edge bowls, thick off-centre legs, split or partly hollow stock – throw considerable force at the spindle, and a longer, thicker clamping body holds that load with less flex than a small one. Joineries, furniture workshops and turning shops in Georgia handling substantial hardwood blanks or one-off decorative pieces are the buyers who need the ES30110 rather than the smaller model.
ES30110 or ES25070
The two HOLZMANN eccentric clamping systems differ only in size. The ES30110 measures ML 110 mm at 30 mm diameter and weighs 1.5 kg net; the ES25070 measures ML 70 mm at 25 mm diameter and weighs 1 kg net. Choose the ES30110 for heavier and longer unbalanced work, and the ES25070 where the lathe and the blanks are smaller and the extra length is simply in the way.
Delivery
The ES30110 is delivered as the clamping system alone, 1.5 kg net and 1.60 kg gross, under EAN 9120039908342. Lathe, faceplate and turning tools are not part of the delivery. Because spindle and tailstock fittings differ from lathe to lathe, confirm the mounting on the target machine with the dealer before ordering the ES30110.
ძირითადი მახასიათებლები
- ML 110 mm at Ø 30 mm - 40 mm longer and 5 mm thicker in the shank than the ES25070
- 1.5 kg net and 1.60 kg gross, the heavier of the two HOLZMANN eccentric clamping systems
- The greater section resists deflection under a large, strongly out-of-balance blank
- Packed 100 x 100 x 120 mm, the taller of the two HOLZMANN eccentric-clamp cartons
- HOLZMANN states the purpose plainly: used to fix heavy and unbalanced turning pieces
- Carries EAN 9120039908342
ტექნიკური მახასიათებლები
- Type
- Eccentric clamping system for wood lathes
- ML
- 110 mm
- Diameter
- 30 mm
- Application
- Fixing heavy and unbalanced turning pieces
- Net weight
- 1.50 kg
- Gross weight
- 1.60 kg
- EAN code
- 9120039908342
უპირატესობები
- Largest HOLZMANN eccentric clamp at ML 110 mm and 30 mm diameter - built for heavy blanks
- Longer, 1.5 kg body flexes less than the smaller ES25070 under out-of-balance load
- Carries a HOLZMANN EAN (9120039908342) for clean stock and catalogue handling
გასათვალისწინებელი
- HOLZMANN publishes no thread or mounting data, so lathe compatibility must be checked first
- Longer and heavier than the ES25070, which can be awkward on a small lathe with limited clearance
- Workholding only: no lathe, faceplate or turning tools are included