ძირითად შიგთავსზე გადასვლა

გამწოვი (ასპირაცია)

A dust collector pulls chips and shavings away from the machine that makes them, through a hose or a ducted trunk line into a bag, and it is what keeps a woodworking shop breathable, safe and tidy. This category holds 17 HOLZMANN units, from the 23 kg ABS850 that serves one machine to the ABS8000PRO that feeds a whole ducted workshop, plus the FAN2200 and FAN4000 fan bodies for custom systems. Airflow runs from 850 to 8000 m³/h and static pressure from 800 to 3835 Pa, in 230 V single-phase and 400 V three-phase. All 17 are supplied by quotation.

განახლდა

ავტომატური მიმწოდებელიგამწოვი (ასპირაცია)დანების სალესი დანადგარისახეხი მაგიდაციკლონური გამწოვი

ნაპოვნია 9 დანადგარი

ნაპოვნი დანადგარები

How to choose a dust collector for a woodworking shop

Choose a dust collector from the port sizes and the duct run in front of it, not from the number of machines on paper. A single-machine collector such as the ABS850, ABS1080 or ABS1500FF is built for one Ø100 mm hood on a short hose. A ducted workshop needs a large trunk port and high static pressure – the ABS3000SE, ABS4560, ABS5000SE, ABS8000PRO or ABS7500MF class – because pressure, not the airflow figure on the label, is what survives a pipe run full of bends and blast gates.

Read airflow and static pressure together

Airflow and static pressure do two different jobs. Airflow in m³/h moves the volume of air; static pressure in Pa pushes that air down a long, restricted duct. On a short hose into a planer, airflow decides: the ABS850 gives 850 m³/h at 800 Pa, the ABS1500FF 1500 m³/h at 1020 Pa. On a fixed installation, pressure decides: the ABS7500MF reaches 3835 Pa on a 280 mm port, the ABS8000PRO 2800 Pa. Compare the ABS3880 at 3880 m³/h and 1750 Pa with the ABS4560 at 4560 m³/h and 2500 Pa to see how differently two similar machines behave on a trunk line.

Single-phase or three-phase supply?

Power supply removes several dust collectors from the shortlist before airflow does. The ABS850, ABS850DBK, ABS1080, ABS1500FF, ABS2200FLEX, ABS2480, ABS3880, ABS4000 and ABS4500MF run on 230 V single-phase, and several are also offered as a 400 V variant; the ABS3000SE comes in both. The ABS4500MF is the one unit above 4000 m³/h that stays on 230 V, at 4500 m³/h and 2690 Pa. The MABS750, ABS4560, ABS5000SE, ABS7500MF, ABS8000PRO, FAN2200 and FAN4000 are 400 V three-phase only.

Ceiling height, floor space and noise

Measure ceiling height before choosing a bag collector, because the bag column is the usual surprise: the ABS8000PRO stands 2800 mm, the ABS5000SE 2470 mm, the ABS2480 2430 mm and the ABS3000SE 2200 mm, each needing clearance above to change the bag. For a low shop the ABS4000 adjusts to a maximum of 1950 mm, and the ABS2200FLEX is 750 mm tall on a 1540 x 550 mm chassis that slides under a machine table. Noise follows size: the ABS850DBK stays under 70 dB(A) sound pressure and the ABS3000SE, ABS5000SE and ABS8000PRO under 85 dB(A), while large bag units sit near 87 to 90 dB(A).

What you budget separately

Budget the system around the dust collector, not only the collector. Ducting, hose, blast gates, clamps, reducers and the electrical work for a 400 V machine are separate items. Chip bags and filter elements are consumables: the ABS4500MF carries an 18-element block of 8.46 m², the ABS7500MF a 35-element block of 16.45 m². The FAN2200 (200/180 mm, 4000 m³/h) and FAN4000 (full-bore Ø250/Ø250, 6500 m³/h) are fan bodies rather than complete collectors, bought to drive a separator or filter housing specified around them.

What separates the cheap end from the expensive end

The distance from the ABS850 to the ABS8000PRO is duty, not just size. The ABS850 is a 750 W, 23 kg mobile unit with one Ø100 mm port and a 40 l bag, for one machine at a time. The ABS8000PRO is a 4500 W, 93 kg fixed installation whose Ø250 mm outlet divides into three Ø125 mm and one Ø100 mm connection, with the suction connection selectable top or bottom.

როგორ ავირჩიოთ

One machine, short flexible hose
ABS850 (850 m³/h, 40 l bag) or ABS1080 (1080 m³/h, 100 l bag); the ABS1500FF adds airflow at 1500 m³/h in a 1400 mm tall body.
Two or three machines on a short trunk
ABS2480 with two Ø100 mm ports, ABS3880 with three, or ABS3000SE with a Ø150 mm plus three Ø100 mm outputs and a distributor.
Whole shop on a fixed ducted main
ABS5000SE (4 x Ø100 mm, 5000 m³/h), ABS8000PRO (Ø250 mm outlet, 8000 m³/h) or ABS7500MF (280 mm port, 7500 m³/h at 3835 Pa).
No three-phase board in the workshop
Stay on 230 V: the ABS4500MF is the only unit above 4000 m³/h on single-phase; ABS850 to ABS4000 also have 230 V versions.
Ceiling below 2 metres
ABS4000, height-adjustable to a maximum of 1950 mm, or the ABS2200FLEX at 750 mm tall, which parks under a machine table.
Long duct run with bends and blast gates
Prioritise static pressure over airflow: ABS7500MF 3835 Pa, ABS8000PRO 2800 Pa, ABS4500MF 2690 Pa, ABS5000SE 2600 Pa, ABS4560 2500 Pa.
Lathe or bench needing a flat hood
ABS850DBK, with a height-adjustable 230 x 125 mm hood that sits behind a turning workpiece, and under 70 dB(A) sound pressure.
Existing cyclone, silo or custom filter housing
Buy the fan only: FAN2200 (200/180 mm, 4000 m³/h at 1900 Pa) or FAN4000 (Ø250/Ø250 full bore, 6500 m³/h at 2000 Pa).

ხშირად დასმული კითხვები

Which dust collector suits one machine, and which suits a whole workshop?
For one machine on a short hose, a dust collector in the ABS850, ABS1080 or ABS1500FF class is enough: 850 to 1500 m³/h through a single Ø100 mm port. For two or three machines, the ABS2480 (two ports), ABS3880 (three ports) or ABS3000SE (Ø150 mm plus three Ø100 mm with a distributor) are the natural step. For a whole ducted workshop, the ABS5000SE, ABS7500MF and ABS8000PRO carry the trunk port and static pressure a fixed installation needs.
Can one dust collector run two or three machines at the same time?
A dust collector with several ports is normally sized for one or two hoods open at a time, not for every branch open at once. The ABS3000SE is supplied with a distributor so three woodworking machines can be connected, and the ABS5000SE offers four Ø100 mm branches with three of them cappable - the caps and blast gates exist precisely so that airflow goes to the machine being used. If several machines genuinely run together, size on the total airflow of the open hoods and choose from the ABS4560 class upwards.
Which dust collectors run on 230 V single-phase power?
The ABS850, ABS850DBK, ABS1080, ABS1500FF, ABS2200FLEX, ABS2480, ABS3880, ABS4000 and ABS4500MF run on 230 V single-phase, and several of them are also offered as a 400 V variant; the ABS3000SE is available in both. The ABS4500MF is the only unit above 4000 m³/h that stays single-phase, at 4500 m³/h and 2690 Pa. The MABS750, ABS4560, ABS5000SE, ABS7500MF, ABS8000PRO, FAN2200 and FAN4000 require a 400 V three-phase supply.
How much space and ceiling height does a dust collector need?
Bag-type dust collectors are tall: the ABS8000PRO stands 2800 mm, the ABS5000SE 2470 mm, the ABS2480 2430 mm, the ABS4560 2320 mm and the ABS3000SE 2200 mm, and each needs clearance above to change the bag or sleeve. In a low workshop, the ABS4000 adjusts to a maximum of 1950 mm and the ABS2200FLEX is 750 mm tall on a 1540 x 550 mm chassis that fits under a machine. Add space for the duct run and for standing room to empty the bags.
What do I have to budget besides the dust collector itself?
Beside the dust collector, budget ducting, flexible hose, blast gates, clamps and reducers, plus electrical installation for a 400 V machine. Replacement chip bags and filter elements are running costs - the ABS4500MF uses an 18-element block of 8.46 m² and the ABS7500MF a 35-element block of 16.45 m². The FAN2200 and FAN4000 are fan bodies only and need a separator or filter housing designed around them. Send us a sketch of your shop with the machine ports marked and the quotation can cover the ducting as well.
What drives the cost of a dust extraction system?
The cost of a dust extraction system is driven by the airflow and static pressure you need, by the number and size of the ports, by filter area and bag capacity, by the ducting and blast gates around the machine, and by delivery, positioning and electrical commissioning. A single-machine ABS850 and a ducted ABS8000PRO installation are different projects, not two prices for the same thing. Tell us the machines to be connected and the shop layout, and you will receive a quotation for the collector and the system around it.